/men/news_view.aspx?id=592&gp=160
Precautions for Cleaning Automotive Mold Machines
Source：本站Time：2024/1/31 9:15:53
When cleaning the car mold machine, the following points should be noted:
Firstly, make sure that the machine has completely stopped working and has been powered off.
2. Then, do not use ordinary cleaning agents or solvents for the cleaning agent to avoid damage to the machine.
3. When cleaning, avoid using high-pressure water to prevent damage to the machine.
4. After cleaning, rinse thoroughly to avoid residual cleaning agents.
5. After cleaning, let the machine dry naturally and do not use hot air to blow dry, in order to avoid damage to the machine.
6. Regularly perform deep cleaning to maintain the cleanliness and good operating condition of the machine.
相關資訊：
- Introduction to Side Hole Machine
- How to customize a side hole machine
- What precautions should be taken for the edge inspection vibration knife integrated machine
- Automotive mold machining process
- Precautions for cleaning the side hole machine
- Common knowledge of advertising engraving machine
- Operation process of vibration engraving machine